Rear

ASSEMBLY

60/40 Seat Back- 40





1. Install the seat back cover to the seat back cushion and install new hog rings.
2. Install the cover and cushion to the seat back frame, pull the seat cover tight around the cushion and seat frame.
3. Install the head rest guides to the top of the seat cushion.
4. Secure the seat back cover retainers (1, 2, 3 and 4).





5. Install the right hinge and bolts (1) to the seat back frame and tighten to 47.5 Nm (35 ft. lbs.).





6. Secure the seat back cover retainers (3).






NOTE: Replace any damaged clips as necessary. Failure to replace any missing or damaged clips could result in a noise complaint.

7. Install the seat back trim panel (2) to the seat back frame (1).
8. Seat the six push pin fasteners (3) fully.
9. Install the two lower push pin fasteners (4) and seat fully.
10. Install the 40 seat back assembly. Seat Back - Installation

60/40 Seat Back - 60





1. Install the seat belt assembly and bolt to the seat back frame and tighten to 47.5 Nm (35 ft. lbs.).
2. Install the seat back cover to the seat back cushion and install new hog rings.
3. Feed the seat belt through the cushion and cover.
4. Install the cover and cushion to the seat back frame, pull the seat cover tight around the cushion and seat frame.

NOTE: Replace any head rest guide's damaged during removal.

5. Install the head rest guides to the top of the seat cushion.





6. Install the seat belt trim to the top of the seat back cushion.





7. Secure the seat cover retainers (1, 3).
8. Install the 60 seat back assembly. Seat Back - Installation