Operation CHARM: Car repair manuals for everyone.
Home >> Dodge or Ram Truck >> 2010 >> Nitro 4WD V6-4.0L >> Repair and Diagnosis >> Transmission and Drivetrain >> Drive/Propeller Shafts, Bearings and Joints >> Drive/Propeller Shaft >> Service and Repair >> Removal and Replacement >> Drive Shaft - Installation >> Front

Front






INSTALLATION






NOTE: Clean all propeller shaft bolts and apply Mopar(R) Lock AND Seal Adhesive or equivalent to the threads before installation.

1. Compress the propeller shaft enough to install the shaft into the axle and transfer case flanges.
2. Align installation reference marks on the transfer case flange (1) front shaft CV joint (2).





3. Install CV joint retainers (2) and bolts (1). Tighten bolts to 30 Nm (22 ft. lbs.).





4. Align installation reference marks on the front propeller shaft flange (1) and axle flange (2).





5. Install the axle flange (1) bolts (2) and tighten to 108 Nm (80 ft. lbs.).

pro multis · About Operation CHARM