MP140 Transfer Case - Fluid Drain and Refill

STANDARD PROCEDURE - FLUID DRAIN/REFILL










NOTE: The fill (2) and drain (3) plugs are both in the rear case.

1. Position drain pan under transfer case.
2. Remove drain and fill plugs and drain lubricant completely.
3. Install drain plug. Tighten plug to 12 -15 Nm (9 -11ft. lbs.).
4. Remove drain pan.
5. Fill transfer case to bottom edge of fill plug opening with the required fluid.
6. Install and tighten fill plug to 12-15 Nm (9-1 1ft. lbs.).