MP143 Transfer Case - Fluid Drain and Refill

STANDARD PROCEDURE - FLUID DRAIN/REFILL




MP143 COMPONENT LOCATIONS





1. Raise vehicle.

NOTE: The fill (2) and drain (3) plugs are both in the rear case.

2. Position drain pan under transfer case.
3. Remove drain and fill plugs and drain lubricant completely.
4. Install drain plug. Tighten plug to 12-15 Nm ( 9-11 ft. lbs.).
5. Remove drain pan.
6. Fill transfer case to bottom edge of fill plug opening with MOPAR(R) ATF+4 ATF.
7. Install and tighten fill plug to 12-15 Nm ( 9-11 ft. lbs.).
8. Lower vehicle.