Cylinder Head Assembly

CYLINDER HEAD





Step 1
M12 bolts 34 Nm (25 ft. lbs)
M8 bolts 20 Nm (15 ft. lbs)
Step 2
M12 bolts 54 Nm (40 ft. lbs)
M8 bolts (verify) 20 Nm (15 ft. lbs)
Step 3
M12 bolts Turn 90° (Turn 90°)
M8 bolts 34 Nm (25 ft. lbs)

SURFACE VARIATION

If tolerances exceed 0.0508 mm (0.002 in.) replace the cylinder head

INTAKE MANIFOLD

Intake Manifold - Bolts Specifications

CAMSHAFT GEAR/SPROCKET

Camshaft Gear/Sprocket Specifications

EXHAUST MANIFOLD

Exhaust Manifold - Bolts Specifications