Rear Door Glass - Removal

REMOVAL






NOTE: Quad Cab model shown, Mega Cab models are similar.

1. Remove the inner belt molding Front Door Molding - Removal.
2. Remove the waterdam Watershield - Removal.
3. Install the manual window crank or reconnect the electric window switch to the door wire harness (depending on application) and raise the door glass to the position shown.
4. Remove the two nuts (1) that secure the door glass (2) to the window regulator (3) through the speaker opening (5) and the sight window (4) and disengage the door glass from the regulator.





5. Remove the two bolts (1) that secure the front glass run channel (2) to the door and remove the run channel through the door panel opening.
6. Disengage the door glass from the window regulator and lower the glass into the door.
7. Carefully rotate the door glass within the door and remove the glass from the window opening.