B1285
B1285-PARK ASSIST DISABLE SWITCH PERFORMANCE
For a complete wiring diagram, refer to the Wiring Information.
- When Monitored:
With the ignition on.
- Set Condition:
When the Cluster detects that the Park Assist Disable Switch has been applied for more than 20 seconds.
CHECK FOR AN ACTIVE DTC
1. Turn the ignition on.
2. Press the Park Assist Disable Switch three times.
3. With the scan tool, read DTCs.
Does the scan tool display this DTC as active?
Yes
- Replace the Upper Switch Bank. Instrument Cluster Switch Pod - Removal
- Perform the BODY VERIFICATION TEST. Body Verification Test.
No
- Test complete, the condition or conditions that originally set this DTC are not present at this time. Using the wiring diagrams as a guide, check all related splices and connectors for signs of water intrusion, corrosion, pushed out or bent terminals, and correct pin tension.
- Perform the BODY VERIFICATION TEST. Body Verification Test.