C006C
C006C-9A-STABILITY SYSTEM - COMPONENT OR SYSTEM OPERATING CONDITIONS
For a complete wiring diagram, refer to the Wiring Information.
NOTE: The Electronic Stability Control (ESC) may also be referred to as Electronic Stability Program (ESP) depending on the vehicle model year and configuration. Certain components may also reference ESP, ESC, or use the traction control symbol.
- When Monitored:
Ignition on, the first two minutes of driving above 40 km/h (25 mph).
- Set Condition:
If Anti-lock Brake System (ABS) Module did not see the correct conditions to ensure proper system operation in the first two minutes of driving.
NOTE: If any other DTCs are present, repair them first before continuing with this diagnostic procedure.
INITIALIZE ANTI-LOCK BRAKES SYSTEM (ABS) MODULE
1. Initialize the ABS Module, Perform the ABS VERIFICATION TEST. ABS Verification Test.
Is the DTC status still Active?
Yes
- Replace the Anti-Lock Brake System (ABS) Module. Anti-Lock Brake System Module - Removal.
- Perform the ABS VERIFICATION TEST. ABS Verification Test.
No
- NOTE: This DTC may have been caused due to road conditions at start of drive.
Test complete, the condition or conditions that originally set this DTC are not present at this time.