Hood - Installation

INSTALLATION

NOTE: The Vehicle Emission Control Information (VECI) label(s) must be in place for the life of the vehicle. When replacing the component in which the VECI label is adhered, a new VECI label must also be adhered to the new component.





1. Position the hood (1) onto the hood hinges (2) and loosely install the two bolts that secure the hood to each hood hinge.
2. Align the hood to the marks left from the removal procedure, to the hood hinges (2) and tighten the bolts to 16 Nm (12 ft. lbs.).
3. Support hood.
4. Install the hood strut.





5. Install the windshield solvent hoses (2).