Power Liftgate Latch - Installation

INSTALLATION





1. Position the power liftgate latch (1) into the inside of the liftgate (2).
2. Reconnect the connector (4) of the liftgate wire harness (3) to the pigtail wire connector of the latch.
3. Loosely install the screw (5) into the right rear mounting hole that secures the latch to the lower shut face of the liftgate.
4. Install and tighten the two screws into the front mounting holes that secure the latch to the liftgate. Tighten the screws to 12 Nm (106 in. lbs.).
5. Tighten the left rear latch mounting screw to 12 Nm (106 in. lbs.).
6. Reinstall the lower trim panel onto the inside of the liftgate. Liftgate Trim Panel - Installation.
7. Reconnect the battery negative cable.
8. Perform the Power Liftgate Learn/Relearn Cycle standard procedure. Power Liftgate Operation.