Single Pane Sunroof - Description

DESCRIPTION




Figure 1 - GLOBAL SUNROOF





WARNING: Keep fingers and other body parts out of sunroof opening at all times.

The sun roof features consists of:

- Sun roof glass
- Sun roof sun shade

The sunroof power sliding glass panel and sunshade can be positioned anywhere along its travel, rearward of glass panel front edge.

The sunroof is electrically operated from a switch located in the overhead console. To operate the sunroof the ignition switch must be in the ACCESSORY or ON/RUN position. The open/close switch is a rocker style design that opens or closes the sunroof; the vent switch is a push-button design. The 'express-open' function of the motor is triggered by a single quick press-and-release of the 'open' button. This causes the glass panel to retract to the open position. The wind deflector will deploy as the glass panel retracts. The operator can control the position of the glass panel by pressing and holding the open button until the glass panel has reached the desired position. Both the close and vent buttons also have 'express' functionality. The sunroof will also operate after the ignition key is turned off and the doors remain closed for customer comfort and convenience while parking.