Front

INSTALLATION





1. Before proceeding with the following repair procedure, review all warnings and cautions. Service Precautions
2. Position the seat cover over the seat cushion foam and secure the cover clips (1) to the foam clips (2) fully.





3. Position the cushion cover and foam over the seat pan and connect the j-straps (1).





4. Position the rear of the seat cushion assembly (2) back under the seat back (1) and position the front of the cushion down over the seat adjuster frame.





5. Position the seat cushion assembly onto the seat frame and install the clamps (1).
6. Connect the wire harness to the seat cushion pan, if equipped.
7. Install the bolts (2) and tighten to 10 Nm (85 in. lbs.).





8. Secure the rear J-straps (1) at the rear of the seat back.