Second Row Seats

INSTALLATION






NOTE: 40% seat cushion shown, 60% seat cushion similar.

1. Seat the strip fasteners (1) into the seat foam clips (2) fully and secure the hook and loop fastener strips.





2. Secure the J-straps (1) to the seat cushion frame and seat fully.





3. Install the seat cushion assembly and install the pivot bolts (1).
4. Tighten the pivot bolts (1) to 22.5 Nm (16.5 ft. lbs.)





5. Secure the seat cushion cable housing (2) to the seat back assembly and connect the cable end (1) to the arm.





6. Install the side covers (2).





7. Connect the cable (2) if necessary.
8. Install the side cover (1).
9. Connect the electrical connectors, if equipped.
10. Install the side covers.
11. Install the recliner handle.
12. Install the seat. Service and Repair