Right Cylinder Head

REMOVAL - RIGHT CYLINDER HEAD





1. Remove the oil fill cap (1).
2. Remove the engine cover (2).





3. Perform the fuel pressure release procedure Service and Repair.
4. Disconnect and isolate the negative battery cable (2).





5. Remove the cowl cover panel (2) Cowl Panel Cover - Removal.
6. Drain the cooling system Service and Repair.
7. Remove the air cleaner and resonator assembly Air Cleaner Body - Removal.





8. Remove the cylinder head cover Cylinder Head Cover(s) - Removal.
9. Remove the engine oil indicator tube retaining nut at the exhaust manifold and remove the oil indicator tube.





10. Remove the intake manifold Intake Manifold - Removal.






NOTE: The rocker arms and push rods must be installed in their original location as removed.

11. Remove the rocker arms and push rods. Note their location to ensure installation in their original locations. Valve Rocker Arm - Removal.





12. Using the sequence shown, remove the cylinder head bolts.
13. Remove the cylinder head and discard the cylinder head gasket.