B229B
B229B-00-PASSIVE ENTRY MODULE (PEM) INTERNAL
For a complete wiring diagram, refer to the Wiring Information.
- When Monitored:
Whenever the module is awake.
- Set Condition:
This code is set immediately if the Passive Entry Module internal self test fails.
VERIFY THAT DIAGNOSTIC TROUBLE CODE (DTC) B229B-00-PASSIVE ENTRY MODULE INTERNAL IS ACTIVE
1. With the scan tool, record and erase the DTCs.
2. Cycle the ignition switch off then back on.
3. With the scan tool, read the Active DTCs.
Does the scan tool display: DTC B229B-00-PASSIVE ENTRY MODULE INTERNAL as Active?
Yes
- Replace the Passive Entry Module. Passive Entry Module - Removal.
- Perform the BODY VERIFICATION TEST. Body Verification Test.
No
- Test complete, the condition or conditions that originally set this DTC are not present at this time. Using the wiring diagrams as a guide, check all related splices and connectors for signs of water intrusion, corrosion, pushed out or bent terminals and correct pin tension.
- Perform the BODY VERIFICATION TEST. Body Verification Test.