C1086
C1086-4B-ABS SYSTEM CONTROL TOO LONG-OVER TEMPERATURE
For a complete wiring diagram, refer to the Wiring Information.
- When Monitored:
With the ignition on.
- Set Condition:
When the Anti-lock Brake System (ABS) Module calculated thermal model has determined that there has been excessive system activation.
ANTI-LOCK BRAKE SYSTEM (ABS)
NOTE: Check with customer on driving terrain (e.g. mud, snow, ice) for set condition.
1. Perform any related Technical Service Bulletins (TSBs) for this DTC.
2. Visually inspect the ABS Module wiring.
3. Visually inspect the braking system.
Were any problems found?
Yes
- Repair as necessary.
- Perform the ABS VERIFICATION TEST. ABS Verification Test.
No
- Perform the ABS-INTERMITTENT CONDITION TEST. ABS Intermittent Condition Test.