Sunroof Obstacle Detection Reversal Override

SUNROOF OBSTACLE DETECTION REVERSAL OVERRIDE

There are two methods for overriding the obstacle detection feature if the single pane sunroof sliding glass is unable to close due to a known blockage condition (ice, leaves, debris in track).

OVERRIDE - METHOD 1

Depress and hold the CLOSE push button of the sunroof switch during the close. The sunroof will be in override mode during the close.

OVERRIDE - METHOD 2

Once the sunroof encounters and reverses on an obstacle during express (one touch) closing three consecutive times, the sunroof will be in override mode. All push button commands will be in manual mode (no one-touch or express mode) while the obstacle detection feature is in override mode.

EXITING OVERRIDE MODE

Any sunroof obstacle detection override mode is exited by reaching the close position. Once the override has been exited, all normal operations will resume including the obstacle detection feature.