Rear

REAR






NOTE: The graphic illustrates a left rear axle sensor installed; however, a left rear axle sensor is not used on this vehicle. The installed right rear axle sensor that is used on this vehicle is similar.

1. Disconnect and isolate the battery negative cable.
2. Raise and support the vehicle.
3. Locate the rear axle sensor (3) on a bracket between the rear suspension cradle (1) and the rear suspension lower control arm (5).
4. Disconnect the underbody wire harness connector from the rear axle sensor connector receptacle.
5. Remove the screw (6) that secures the sensor link bracket to the rear lower control arm.
6. Remove the rear axle sensor, bracket and link from the vehicle as a unit.