Steering: Service and Repair

STANDARD PROCEDURE - POWER STEERING FLUID LEVEL CHECKING

WARNING: Fluid level should be checked with the engine off to prevent personal injury from moving parts.

CAUTION: There is an Electro-Hydraulic Power Steering (EHPS) pump on some vehicles requiring a different fluid. Do not mix power steering fluid types. Damage may result to the power steering pump and system if any other fluid is used. The mechanical power steering pump systems on this vehicle require the use of Power Steering Fluid +4, which meets material specification MS-9602 or equivalent. The EHPS system uses fluid which meets material specification MS-11655 or equivalent. Do not overfill.

The power steering fluid level can be viewed through the reservoir with MAX and MIN level indicators on the side. Before opening power steering system, wipe the reservoir filler cap free of dirt and debris. When the fluid is at normal ambient temperature, approximately 21°C to 27°C (70°F to 80°F), the fluid level should between MAX and MIN. Use only proper fluids. Do not over fill.