Power Liftgate Chime - Installation

INSTALLATION





1. Position the power liftgate chime (3) to the left inner D-pillar (1) in the vehicle.
2. Engage the retainer integral to the chime housing into the hole in the inner D-pillar.
3. Reconnect the chime pigtail wire connector to the body wire harness connector (4) for the chime.
4. Engage the retainer integral to the chime pigtail wire connector with the hole in the inner D-pillar.
5. Reinstall the quarter trim panel to the lower left inner D-pillar. Quarter Trim Panel - Installation.
6. Reinstall the scuff plat onto the liftgate opening sill (2). Scuff Plate - Installation.
7. Reconnect the battery negative cable.