Shifter Bezel - Removal

REMOVAL

Special Tools:










1. Using trim stick (1) or equivalent, separate the retaining ring (3) from the knob (2) and slide down the shifter shaft.





2. Remove the yellow stamped spring clip (2) from the knob (1) by grabbing the exposed tab with pliers and pulling straight out.
3. Pull the knob (2) off of the shift shaft.





4. Using trim stick or equivalent, release the clip fasteners and separate the console bezel (2).
5. Release the front tabs (1) and position the bezel (2) aside.





6. Disconnect the electrical connectors (1) and remove the shifter bezel.