Third Row

INSTALLATION





1. Install the headrest pivot mechanism (2) and install the bolts (1).
2. Tighten the bolts (1) to 23 Nm (17 ft. lbs.).
3. Secure the cable housing (4) to the mechanism and connect the cable end (3).
4. Install the seat back cover. Seat Back Cover - Installation






NOTE: Illustration shown with headrest cover removed for clarity.

5. Position the clips (1) back into place onto the headrest (2).





6. Position the headrest cover (1) back over the headest and connect the j-straps (2).
7. Position the headrest back over the headrest pivot mechanism posts and seat the headrest fully.