Crankshaft Main Bearing

CRANKSHAFT MAIN BEARING






Tighten the main bearing cap bolts 13 Nm (10 ft. lbs.).
Again, tighten the main bearing cap bolts 27 Nm (20 ft. lbs.).
Rotate the bearing main cap bolts an additional 90°.





Install the crossbolts with new seal washer finger tight
Using the sequence shown, tighten the crossbolts 28 Nm (21 ft. lbs.).
Again, using the sequence shown, repeat the crossbolt tightening procedure.








CRANKSHAFT MAIN BEARING JOURNALS

Bearing Clearance 0.023 - 0.051 mm (0.0009 - 0.002 in.)






MAIN BEARING SELECTION CHART