Rear Half Shaft

REMOVAL





1. Remove the rear caliper and secure. Disc Brake Caliper - Removal.
2. Remove the halfshaft nut.
3. Remove the wheel speed sensor bolt (3) and remove the speed sensor.
4. Remove the toe link nut and bolt (4)
5. Remove the tension link nut and bolt (1).
6. Remove the camber link nut and bolt (2).





7. Swing rear knuckle outward as shown.
8. Remove the halfshaft from the hub.





9. Using a hammer or similar tool (1) as a pivot point and a suitable screwdriver (2), carefully disengage both halfshafts (3) from axle assembly using care not to damage dust seal.
10. Carefully remove the halfshaft from the axle assembly. Use caution to protect axle seal and journal.