Hinge - Removal

REMOVAL

Special Tools:






NOTE: It is not necessary to remove the liftgate to replace one or both hinges. The hinges can be replaced one at a time.

NOTE: A suitable body sealant should be used when removing or moving the hinges.





1. Place the liftgate in the full up position.
2. Support liftgate on a suitable lifting device.
3. Using a trim stick or equivalent, remove the upper rear headliner trim.
4. Mark outline of hinge on the inside of liftgate to aid in installation.
5. Remove the upper hinge bolts (1).





6. Remove the lower hinge bolts (1).
7. Remove hinge from vehicle.