Third Row Seats

INSTALLATION





1. Position the seat back cover (2) onto the seat back cushion (4) and install new hog rings (3).
2. Engage the hook and loop (1) that secures the seat back cover to the seat back cushion.





3. Install the seat back cushion and cover (6) over the headrest rods (9) and onto the seat back frame (5).
4. Route the pull strap (7) and release strap (8) through the seat back cover.
5. Engage the seat cover retaining tabs (1) to the seat back frame.
6. Engage the two elastic straps (3) to the bottom of the seat back frame.
7. Engage the J-clips (2 and 4) that secure the seat back cover to the seat back frame.





8. Install the seat back (5) Seat Back - Installation.
9. Install the seat back panel (4) Seat Back Panel - Installation.
10. Install the headrest (2) Headrest - Installation.
11. Install the release strap bezel (1). Make sure the bezel is fully engaged to the seat back frame.
12. Install the seat bottom cushion and cover assembly Seat Cushion Cover - Installation.