Front

REMOVAL

NOTE: Seat - Description for a detailed exploded view of the seats.

NOTE: All call outs are in reference to the Driver Power exploded view unless otherwise noted.

1. Remove the seat from the vehicle. Seat - Removal.
2. Remove the seat back. Front.
3. Remove the lumbar handle cover (23).
4. Remove the retaining fastener (22) and remove the handle (21).
5. Remove the back panel from the seat back. Seat Back Panel - Removal.
6. Remove the J-clips and pushpins on the seat back cover from the frame.
7. Remove the side airbag (SAB) mounting nuts.
8. Disconnect the SAB wiring connector.
9. Remove the SAB from the seat cover.
10. Remove the inner inboard shield (41).
11. Remove the inner outboard shield (28).
12. Remove the headrest guides (12). Headrest Sleeve - Removal.
13. Starting from the bottom rear of the seat back, carefully pull seat cover off seat cushion to expose hog rings.
14. Cut hog rings and discard.
15. Remove the cover from the seat back assembly.
16. Remove the seat cushion foam, if required.