Second Row Seats

INSTALLATION

NOTE: For detailed seat view, Seat - Description .

1. Carefully pull the seat cover over the seat foam, installing any hog rings, if required.
2. Zip the cover on to the foam.
3. Install the cushion to the seat frame.
4. Install the gas strut to the seat cushion, if equipped.
5. Install the cable assembly to the seat cushion.
6. Ensure the seat cushion is latched into the seat frame.
7. Install the outboard seat bolt securing the seat cushion to the seat frame. Tighten to 30 N-m (22 ft. lbs.).
8. Install the inboard seat bolt, if required.
9. Install the seat side shields.
10. Install the seat recliner handle.
11. Install the seat recliner handle fastener and cover.
12. Install the seat adjuster handle.
13. Install the seat adjuster handle fastener and cover.
14. Install the seat to the vehicle, if required. Seat - Installation.