Electronically Controlled Clutch - Installation

INSTALLATION





1. Make sure transaxle is in Neutral (N) position.
2. Raise vehicle on hoist.
3. Install the ECC.
4. Install the mounting bolts at the ECC and tighten to 60 Nm (44 ft. lbs.).
5. Connect the electrical connector at the ECC.





6. Align marks (4) on propeller shaft rubber coupler (1) to rear axle input flange (5).
7. Install three rear propeller shaft to rear axle retaining bolts (3) and tighten to 58 Nm (43 ft. lbs.).
8. Lower vehicle.