Headlamp Washer Relay - Description

DESCRIPTION





The headlamp washer relay (1) is a conventional International Standards Organization (ISO) skirted relay. Relays conforming to the ISO specifications have common physical dimensions, current capacities, terminal patterns (2), and terminal functions. This relay is contained within a small, rectangular, molded plastic housing and is connected to all of the required inputs and outputs through five integral male spade-type terminals that extend from the relay base plate.

The headlamp washer relay is located in a dedicated connector on a take out of the Front End Module (FEM) wire harness, and is secured to the radiator closure panel to the left of the washer reservoir in front of the engine compartment Power Distribution Center (PDC), near the battery. The headlamp washer relay cannot be adjusted or repaired and, if ineffective or damaged, the unit must be replaced.