Serpentine Accessory Drive Belt - Installation

2.4L










NOTE: When installing the drive belt on the pulleys, make sure that the belt is properly routed and all V-grooves.

1. Install the accessory drive belt (2) around all the pulleys except for the generator pulley (3).
2. Using a wrench, rotate accessory drive belt tensioner (8) counterclockwise until accessory drive belt (2) can be installed on the generator pulley (3). Slowly release the tensioner to tighten the belt on all of the pulleys.
3. Verify that the belt is seated correctly on all of the pulleys.