Fuel Injector - Installation

2.4L





1. Apply a light coating of clean engine oil to the upper O-ring.
2. Install injector in cup on fuel rail.





3. Install retaining clip.





4. Apply a light coating of clean engine oil to the O-ring on the nozzle end of each injector.
5. Insert fuel injector nozzles into openings in lower intake manifold. Seat the injectors in place.





6. Install fuel rail mounting screws, tighten to 27 Nm (20 ft. lbs.).





7. Install wiring harness clips to the fuel rail mounting studs.





8. Connect and lock the electrical connectors to the fuel injectors.





9. Connect fuel supply tube to fuel rail Service and Repair.
10. Connect negative battery cable, tighten nut to 5 Nm (45 in. lbs.).
11. Use the scan tool to pressurize the fuel system. Check for leaks.
12. Install engine cover.