Rechargeable Flashlight - Installation

INSTALLATION





1. Align the bezel/charging station (1) with the mounting hole near the rear of the left quarter trim panel (2).
2. Using hand pressure, push the bezel/charging station into the mounting hole firmly and evenly until all 6 of the spring clip retainers (3) snap into place on the back side of the trim panel.
3. Reconnect the body wire harness connector (4) to the connector receptacle on the back of the bezel/charging station.
4. Reinstall the left quarter trim panel. Quarter Trim Panel - Installation.
5. Reconnect the battery negative cable.