Rechargeable Flashlight - Removal

REMOVAL





1. Disconnect and isolate the battery negative cable.
2. Pull the rear of the left quarter trim panel (2) away from the D-pillar far enough to access the back of the bezel/charging station (1). Quarter Trim Panel - Removal.
3. Disconnect the body wire harness connector (4) from the connector receptacle on the back of the bezel/charging station.
4. Compress the spring clip retainers (3) far enough to allow the bezel/charging station to be pushed out of the mounting hole through the face of the quarter trim panel. Six spring clip retainers are used, three on the forward side and three on the rearward side of the unit.
5. Remove the bezel/charging station from the vehicle.