A/C Discharge Line - Removal

REMOVAL

WARNING: Refer to the applicable warnings and cautions for this system before performing the following operation Warning and Caution . Failure to follow these instructions may result in possible serious or fatal injury.





1. Disconnect and isolate the negative battery cable.
2. Recover the refrigerant from the refrigerant system Refrigerant System Recovery.
3. Remove the nut (5) that secures the A/C discharge line (1) to the condenser tapping block (2) located on the right side of the condenser.
4. Disconnect the A/C discharge line from the tapping block.





5. Remove the nut (3) that secures the A/C discharge line (1) to the A/C compressor (2).
6. Disconnect the A/C discharge line from the A/C compressor and remove the discharge line from the engine compartment.
7. Remove and discard the O-ring seals and gaskets and install plugs in, or tape over the opened discharge line fittings and the compressor and condenser ports.