Holding Clutch - Description

DESCRIPTION




Figure 1 - 68RFE CLUTCH ORIENTATION








Figure 2 - 2/4 CLUTCHES








Figure 3 - LOW/REVERSE CLUTCH





Three hydraulically applied multi-disc clutches are used to hold some planetary geartrain components stationary while the input clutches drive others. The 2C, 4C, and Low/Reverse clutches are considered holding clutches. The 2C and 4C clutches are located in the 4C retainer/bulkhead (12).

The Low/Reverse clutch is located at the rear of the transmission case.