Shifter

SHIFTER





1. Install the shift cable retainer (2).
2. Install the shifter cable end (1).

3. Install the shifter assembly.




4. Install the fasteners (1), and tighten to 7 Nm (65 in. lbs.).





5. Install the fasteners (1), then install the rubber liners into the storage tray and cupholders.





6. Reconnect the power outlet harness connector (1) and the shifter harness connector (2).





7. Install the console bezel (1).





8. Install the fasteners (1) at the front of the console bezel.





9. Install the rubber insert (1).





10. Install the console bezel trim ring (1).

11. Verify correct shifter operation. The vehicle should only start in PARK or NEUTRAL.