APS Verification Test

APS VERIFICATION TEST
PERFORM ADJUSTABLE PEDALS SYSTEM VERIFICATION TEST
1. Make sure all accessories are turned off and the battery is fully charged.
2. Connect all previously disconnected components and connectors.
3. If not done previously, turn the ignition on.
4. Using a scan tool, erase all Diagnostic Trouble Codes (DTCs) from all modules.
5. Cycle the ignition from on to off.
6. Turn the ignition on.
7. Operate the Adjustable Pedals in both directions.
8. Press the Adjustable Pedals switch in one direction for at least one second then release the switch. Repeat three times consecutively, but press the switch in the opposite direction each time.
9. Using a scan tool, read DTCs from all modules.

Are any DTCs present or is the original concern still present?

Yes

- Repair is not complete. Refer to appropriate system for the diagnostic procedure.

No

- Repair is complete.