Button

BUTTON






NOTE: The ON/OFF switch button (or boot) can be serviced without removing the storage bin from the vehicle. However, the button also secures the switch to the bin end panel. Any time the button is removed from the switch, the switch can be easily pushed out of its mounting hole, which may require the storage bin be removed from the vehicle to access the switch and reposition it into the mounting hole. Once the switch button has been loosened or removed, a short piece of mechanic's wire wrapped once around the base of the threaded switch sleeve can help to ensure the switch remains properly positioned in the mounting hole until the switch button can be reinstalled.

1. Position the button (2) over the threaded sleeve of the ON/OFF switch button on the storage bin end panel (1).
2. Rotate the button clockwise to screw it onto the threaded switch sleeve.
3. Tighten the button securely.