Integrated Trailer Brake Module - Installation

INSTALLATION





1. Position the Integrated Trailer Brake Module (ITBM) (1) and snap the bottom retainer clips into place.






NOTE: One screw on the right front of the ITBM not shown.

2. Install the three ITBM retainer screws (1).





3. Connect the ITBM electrical connectors (1).





4. Position the left instrument panel side cover (1) and press the retainers into place in the IP.





5. Position the steering column opening cover (1) and press the upper retainers into place in the IP.
6. Install the steering column opening cover retaining screws (2).
7. Connect the battery negative cable.