Sliding Backlite - Installation

INSTALLATION

Manual





1. Slide the vent glass (3) upper edge into window frame (2) and insert the lower edge into the lower molding.
2. Position the upper run channel (1) into the window frame (2) and slide it into place.
3. Verify vent glass (3) operation.

Crew/Quad Cab





1. Position the glass (3) and connect the right side cable.
2. Slide the vent glass (3) upper edge into window frame (2) and insert the lower edge into the lower molding.
3. Connect the left side cable to the glass and secure the cable housing block into the lower glass channel.
4. Position the upper run channel (1) into the window frame (2) and slide it into place.
5. Install the rear seats. Rear Seat - Installation

Mega Cab





1. Position the glass (3) and connect the right side cable.
2. Slide the vent glass (3) upper edge into window frame (2) and insert the lower edge into the lower molding.
3. Connect the left side cable to the glass and secure the cable housing block into the lower glass channel.
4. Position the upper run channel (1) into the window frame (2) and slide it into place.