Console PRNDL Bezel

CONSOLE PRNDL BEZEL





1. Install the console PRNDL bezel, and verify all clips (1) are engaged.





2. Install the lamp into the console PRNDL bezel, and turn the harness connector 1/4 turn clockwise to engage the tabs.





3. Install the lower trim piece (1) onto the shifter lever.
4. Install shifter knob.
5. Pull the lower trim piece (1) upward to engage it on the shifter knob.





6. Connect the power outlet harness connector (1) and the shifter harness connector (2).





7. Install the fasteners (1), and the rubber liners from the center storage tray and cupholders.





8. Install the console bezel (1).





9. Install the fasteners (1) at the front of the console bezel.





10. Install the rubber insert (1).





11. Install the console bezel trim ring (1).