Third Row - Seat Recliner Switch

REMOVAL






NOTE: The procedure for replacing the seat recliner switch is the same for both the 60 and 40 third row power folding seats. The following steps should be performed only on the seat with the inoperative seat recliner switch.

1. Remove the effected third row power folding seat, Seat - Removal.
2. Remove outboard side shield.
3. Remove the seat cushion and cover assembly as necessary, Seat Cushion Cover - Removal.
4. Disengage the recliner switch retaining cover (2) from the retaining tabs (5) on the switch retainer sewn into the seat cover (1).
5. Slide the switch and retaining cover assembly forward to release it from the two holding tabs (4) and lift it out of the retainer.
6. Disconnect electrical connector.
7. Separate the switch (3) from the switch retaining cover (2).