Front Blower Motor Power Module - Installation

INSTALLATION

NOTE: Automatic Temperature Control (ATC) shown. Manual Temperature Control (MTC) similar.





1. Position the blower motor power module (5) to the front HVAC housing (1) and engage the two retaining tabs (3). Make sure the retaining tabs are fully engaged.
2. Install the two screws (4) that secure the blower motor power module to the HVAC housing. Tighten the screws to 1.2 Nm (10 in. lbs.).
3. Connect the two wire harness connectors (2) to the blower motor power module.
4. Install the passenger side instrument panel silencer.
5. Reconnect the negative battery cable.