Left Blind Spot Sensor (LBSS)
B2599-00-DOOR MODULE FRONT RIGHT
For a complete wiring diagram, refer to the Wiring Information.
- When Monitored:
With the ignition on.
Vehicle speed greater than 6 mph (9.6 km/h).
- Set Condition:
The door module is reporting a DTC.
Diagnostic Test
CHECK FOR ACTIVE DTC
1. Turn the ignition on.
2. With the scan tool, read DTCs.
Does the scan tool display this DTC as active?
Yes
- Testing and Inspection and perform the appropriate diagnostic procedure.
No
- The condition that caused this code to set is not present at this time. Check for an intermittent condition by inspecting the related wiring harness for chafed, pierced, pinched, and partially broken wires. Also inspect the related connectors for broken, bent, pushed out, spread, corroded, or contaminated terminals.
- Perform the BODY VERIFICATION TEST. Body Verification Test.