Instrument Panel Steering Column Opening Cover - Installation

INSTALLATION






1. Position and install the steering column opening cover (1) to the instrument panel.

2. Install the screw located on the outboard side attaching the steering column opening cover (1) to the instrument panel structure. tighten the screw securely.





3. Install the screws (1) to the steering column opening cover. The screws are located near the hood release handle. Tighten the screws securely.





4. Install the end cap (1) to the instrument panel. Repeat on opposite side.

5. Install the lower cowl trim panel, Cowl Trim Panel - Installation. Repeat on opposite side.

6. Connect the negative battery cable.