Quarter Panel
QUARTER PANEL
LEFT
1. Check to be certain that the plastic nut (3) is in good condition and properly installed in the left quarter inner panel (1).
2. Position the Low Frequency (LF) antenna (6) to the left quarter inner panel.
3. Install and tighten the nut (7) that secures the LF antenna to the weld stud (2) on the left quarter inner panel. Tighten the nut securely.
4. Install and tighten the screw (5) that secures the LF antenna to the left quarter inner panel. Tighten the screw securely.
5. Reconnect the body wire harness connector (4) to the LF antenna connector receptacle.
6. Reinstall the trim panel onto the inside of the left quarter inner panel. Quarter Trim Panel - Installation.
7. Reconnect the battery negative cable.
RIGHT
1. Check to be certain that the two plastic nuts (6) are in good condition and properly installed in the right quarter inner panel (1).
2. Position the Low Frequency (LF) antenna (3) to the right quarter inner panel over the park assist module (5).
3. Install and tighten the two screws (4) that secure the LF antenna to the right quarter inner panel. Tighten the screws securely.
4. Reconnect the body wire harness connector (2) to the LF antenna connector receptacle.
5. Reinstall the trim panel onto the inside of the right quarter inner panel. Quarter Trim Panel - Installation.
6. Reconnect the battery negative cable.