Seat Back: Adjustments

ADJUSTMENTS

NOTE:
Bench seats equipped with child restraint seats have an interlock feature that will not allow the seat back to fold forward with the child seat open.





1. Remove the seat back hinge covers from the driver side hinge Seat Back Hinge - Removal.

2. Remove the recliner synchronizing cable from the hinge by pulling the cable end (1) toward the front of the hinge.

3. Release the U-shaped locking tab (2) on self-adjusting mechanism to disengage auto-adjust feature.

4. Reattach self-adjusting mechanism, pulling against spring load to tighten cable.

5. Press locking tab onto the adjusting mechanism to lock into place.

6. Install the driver side seat back hinge covers Seat Back Hinge - Installation.