Air Cleaner Body - Installation

INSTALLATION






1. Lubricate the three rubber mount sockets (2) with Mopar(R) Rubber Bushing Installation Lube.

2. Engage the air inlet tube and install the air cleaner body (1) straight down on the locating pins until the rubber mount sockets are fully seated.





3. Engage the wire harness retainer (1) to the air cleaner body.





4. Install the hose to the air cleaner body and tighten the clamp (3) to 5 Nm (44 in. lbs.).

5. Install the power steering fluid reservoir with the nut (4) tightened to 5 Nm (44 in. lbs.).

6. Connect the fresh air makeup hose (2) to the air cleaner body.





7. Install the engine cover (1).