Instrument Cluster Switch Pod - Description - RHD

DESCRIPTION - RHD





The instrument panel switch pod (1) is located in the center stack area of the instrument panel. This switch pod contains the following push button switches:

- Hazard Warning Switch (3)

- Electronic Stability Control (ESC) OFF Switch (2)

The switch housing and the push buttons are constructed of molded plastic. Each push button has a smooth finish and is clearly identified with the appropriate text or International Control and Display Symbol icon. The hazard warning switch push button latches, while the ESC OFF switch features momentary operation.

Two screws secure the switch to the back of the instrument panel center bezel through integral mounting tabs that are molded into the diagonally opposite corners of the switch housing. The back of the switch housing has an integral connector receptacle containing terminal pins that connect the switch to the vehicle electrical system through a dedicated take out and connector of the instrument panel wire harness.

Panel lamps dimmer controlled illumination lamps integral to the circuit board within the switch provide back lighting for visibility at night, but these lamps are not serviceable. The individual switches in the instrument panel switch pod cannot be repaired and are not serviced separately. If any component within the switch pod is damaged or inoperative, the entire switch pod unit must be replaced.